1
2
3
4
5
6
7
8
9
59
z
TRO
U
BLESHOOTING
Error Messages
When an error message appears on the display, follow the directions provided below.
Error Messages
Message
Cause/Remedy
Wrong Type
Of Adapter
Connected!
An incompatible AC adapter is connected.
Use an appropriate AC adapter.
Low Battery!
The installed batteries are getting weak.
Replace Battery!
The installed batteries are about to run out.
Recharge
Li-ion Battery!
The battery is low. Please charge the lithium-ion battery.
Li-ion is damaged
Use other
power source!
The Li-ion is damaged. Please use an AC adapter or an other
battery.
Unit Cooling
Wait 10 min.
before restart!
High temperature error.
Cutter Error!
The tape cutter is closed when you try to print or feed tape. Turn the
P-touch off and then on again before continuing. When tape is
tangled in the cutter, remove the tape.
Insert Tape
Cassette!
There is no tape cassette installed when you try to print or preview a
label, or feed tape. Install a tape cassette before continuing.
Text Full!
The maximum number of characters have already been entered. Edit
the text and use fewer characters.
No Text!
There is no text, symbols or bar code data entered when you try to
print or preview a label. Enter data before continuing.
Line Limit!
Max 5 Lines
There are already five lines of text when you press the Enter key.
Limit the number of lines to five.
Incorrect
Value!
The value entered for setting the tape length, multiple copies or
numbering function is invalid. Enter a valid value for the setting.
Tape Width
Limit!
Max 3 Lines
There are more than lines of text that can be input when you press
the Print or Preview key while using 12 mm tape.
Limit the number of lines to three, or replace with a larger width tape
cassette.
Tape Width
Limit!
Max 2 Lines
There are more than two lines of text when you press the Print or
Preview key while using 9 or 6 mm tape. Limit the number of lines
to two, or replace with a larger width tape cassette.
Tape Width
Limit!
Max 1 Line
There is more than one line of text when you press the Print or
Preview key while using 3.5 mm tape. Limit the number of lines to
one, or replace with a larger width tape cassette.
