A - 2 APPENDIX
YL4US_FAX2800MFC4800-FM5.5
HTTP (Recommended)
Use your favorite web browser to connect to the Brother print server.
This will allow you to configure printer and/or print server parameters.
WebJetAdmin
Brother's print server range is HP WebJetAdmin compatible.
TELNET
To connect to the print server using TELNET on UNIX, Windows NT,
or most other TCP/IP systems, type: TELNET
ipaddress
at the
command prompt of the system prompt, where ipaddress is the IP
address of the print server. When you are connected, push RETURN
or ENTER to get the "#" prompt, enter the password
access
(the
password will not appear on the screen), and type anything in
response to the
Enter Username
> prompt. When you see the
Local
> prompt, you are ready to enter commands.
Enter HELP at the command prompt for a list of supported
commands.
BRCONFIG
The Brother BRCONFIG utility runs from the DOS system prompt
and is installed with BRAdmin. To connect the print server using the
Brother BRCONFIG NetWare utility, choose the BRCONFIG utility
from the Brother BRAdmin utilities menu. If you have only one print
server, you will be immediately connected to that server. If you have
more than one print server, you will be given a list of available print
servers. Type the number of the print server to which you wish to
connect. When you are connected, enter the password
access
(the
password will not appear on the screen) at the "#" prompt, and type
anything in response to the
Enter Username
> prompt. When you
get the
Local
> prompt, you are ready to enter commands. To use
BRCONFIG, a Novell Server (running the IPX protocol) is necessary
and an active connection must be made to the server.
Enter HELP at the command prompt for a list of supported
commands.
