Brother MFC830, Руководство пользователя

Страница: 34 / 194

26
Chapter 3
The TAD setting works only with an external telephone answering device (TAD). Ring Delay and
F/T Ring Time do not work in this setting.
To select or change your Receive Mode
1
Press Receive Mode . The screen displays your
current selection.
2
Press the key again and the next selection appears.
After 2 seconds, the screen returns to the date and time
display, along with your new Receive Mode setting.
Manual Reception (Manual Mode)
When you set the Receive Mode to manual, you must answer each incoming call yourself. Select this
mode by pressing
Receive Mode key. Here is what you should do when using Manual Mode:
3. Fax/Tel (F/T) Use this function if you expect to receive many fax messages
and few phone calls. The machine automatically answers
every call. If the call is a fax, it prints the fax. If the call is not
a fax, it signals you with an F/T pseudo-ring, different from the
phone company ringing, to alert you to pick up the call. If you
select this setting, you’ll need to set the Ring Delay and F/T
Ring Time features (on the following pages).
4. TAD This is the only setting in which you can use an external
answering machine. Your telephone answering device is
connected to your machine, and answers every call. Once the
external telephone answering device (TAD) answers, the
machine listens for fax tones. If it detects fax tones, fax
messages are printed.
If you are changing the Receive Mode while in another operation, the screen
returns to that operation.
If You Get a... Then You Should...
1. Regular phone call Talk as you normally would.
2. Phone call and
request to send a fax
Press
Start
when finished talking, and replace the handset.
NOTE: Sender must also press Start.
3. Fax tone... Wait until the fax machine takes over the call or press
Start
.
Receive Mode For
FAX/TEL
TAD:ANSWER MACH.
MANUAL
FAX ONLY
Current Receive Mode
09/06 15:25 FAX
ONLY