Chapter 2
38
c
Do one of the following:
If you press the displayed paper size
for Tray #1, press
Paper Type
.
Press
a
or
b
to display
Plain Paper
,
Inkjet Paper
,
Brother BP71
,
Other Glossy
or
Transparency
, and press the
option you want.
Press
Paper Size
.
Press
a
or
b
to display
A4
,
A5
,
A3
,
10x15cm
,
Letter
,
Legal
or
Ledger
, and press the option you
want.
If you press the displayed paper size
for Tray #2, press
Paper Size
.
Press
a
or
b
to display
A4
,
A3
,
Letter
,
Legal
or
Ledger
, and
press the option you want.
d
Press .
NOTE
• You can use only plain paper in
Tray #2
.
• The machine ejects paper onto the paper
tray on the front of the machine with the
printed side face up. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Tray use in Copy mode
(MFC-J3720/MFC-J6720DW)
2
You can change the default tray the machine
will use for copies.
Auto Tray Select
will allow your machine
to feed paper from either Tray #1 or Tray #2,
using the paper type and size settings from
the
Copy
menu.
To change the default setting follow the
instructions below:
a
Press (
Settings
).
b
Press
All Settings
.
c
Press
a
or
b
to display
General Setup
.
d
Press
General Setup
.
e
Press
a
or
b
to display
Tray Setting
.
f
Press
Tray Setting
.
g
Press
Tray Use: Copy
.
h
Press
Tray #1
,
Tray #2
or
Auto Tray Select
.
i
Press .
NOTE
You can change the paper size and tray
selection temporarily for the next copy.
(See
on page 83 and
Select (MFC-J3720/MFC-J6720DW)