Brother MFC-J220 Скачать руководство пользователя страница 197

Страница: 197 / 220

Printing photos from a memory card or USB Flash memory drive

Remove Red-Eye

The machine detects eyes in your photos and
will attempt to remove red-eye from your
photo.

Note

There are some cases when red-eye may
not be removed.

• When the face is too small in the

image.

• When the face is turning too far up,

down, left or right.

Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (

PHOTO CAPTURE

Press

to choose

Enhance Photos

Press

to choose your photo.

Press

to choose

Remove Red-Eye

Press



When

Remove Red-Eye

successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.



When

Remove Red-Eye

unsuccessful,

Unable to Detect.

is shown.

Press

Note

Press

to try

Remove Red-Eye

once

again.

Press

and enter the number of

copies you want using the dial pad.

Do one of the following:



Press

and change the print

settings. (See

PhotoCapture

Center™ print settings

on page 42.)



If you do not want to change any
settings, press

Colour Start

to print.

Monochrome

You can convert your photo to monochrome.

Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (

PHOTO CAPTURE

Press

to choose

Enhance Photos

Press

to choose your photo.

Press

to choose

Monochrome

Press

and enter the number of

copies you want using the dial pad.

Do one of the following:



Press

and change the print

settings. (See

PhotoCapture

Center™ print settings

on page 42.)



If you do not want to change any
settings, press

Colour Start

to print.

Sepia

You can convert the colour of your photo to
sepia.

Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (

PHOTO CAPTURE

Press

to choose

Enhance Photos

Press

Содержание MFC-J220





























































































































































































































Результаты поиска

Содержание MFC-J220

Отзывы:

Brother MFC-J220, Руководство пользователя, Страница: 197 / 220

Результаты поиска

Содержание MFC-J220

Отзывы: