manualshive.com logo in svg

Brother MFC-9880, Руководство пользователя

Поделиться
Скачать
Brother MFC-9880 Скачать руководство пользователя страница 11

Preparation and Simple User Guide   

1

PREP

ARA

TION

AND SIMPLE USE

Preparation and Simple User Guide

Steps to prepare and use the machine simply

Follow the steps below to prepare and use the machine simply.

However, before you perform these steps, see Important Safety Information (page 149), and 
Advice for Preparation and Simple User Guide (page 4).

If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE.

1

Read the Quick Setup Guide

Follow the instructions on the Brother Quick Setup Guide to set up the machine.

2

Setting the Document

You can scan the document for faxing and copying from either the Automatic Document Feeder 
or from the glass platen.

Using the Automatic Document Feeder

The Automatic Document Feeder can hold up to 50 pages, feeding each one individually through 
the machine. Use standard (75 gsm) paper when using the Automatic Document Feeder. Always 
fan the pages well before placing them in the feeder.

Recommended Environment

Temperature:    20-30˚C (68-86˚F)
Humidity:         50%-70%

DO NOT use curled, wrinkled, folded, or ripped paper, or paper with 
staples, paper clips, paste or tape attached. DO NOT use cardboard, 
newspaper, or fabric. (To copy or scan this kind of document, see 

Using 

the Glass Platen

, page 2)

■

Make sure documents written with ink are completely dry.

■

Documents must be from 14.7 to 21.6 cm wide, and from 12.7 to 35.6 cm long.

Insert documents 

face up

, 

top edge first

.

Adjust the paper guides to fit the width of your pages.

Stagger the pages. Then place them in the Automatic Document Feeder, until you feel the first 
page lightly touch the feed roller.

1

2

3

Documents are
Face Up in the Automatic 
Document Feeder

Document
Stopper

Содержание MFC-9880



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды