manualshive.com logo in svg

Brother MFC 9600, Руководство пользователя

Поделиться
Скачать
Brother MFC 9600 Скачать руководство пользователя страница 177

22 - 3

T R O U B L E S H O O T I N G   A N D   R O U T I N E   M A I N T E N A N C E

Error Messages

Error Message

Cause

Action

DOCUMENT JAM

Documents were not inserted

See “Document Jams and

or fed properly, or document

Paper Jams”, page 22-4.

scanned from ADF was longer
than about 40 inches (90cm).

DOWNLOAD FULL

The download buffer is full.

Press 

FF/Cont

. Printing will

resume (the downloading is
canceled).

MACHINE ERROR

MFC has a mechanical

Call Brother Customer

XX

problem.

Service.
USA:

1-800-284-4329

From within Canada:

1-800-853-6660

From within Montreal:

1-514-685-6464

MEMORY FULL

You can’t store data in the

See page 10-3.

memory.

NO RESPONSE/BUSY

The number you dialed does

Verify the number and try

not answer or is busy.

again.

NOT REGISTERED

You tried to access a

Set up the One Touch or

One Touch or Speed Dial

Speed Dial number.

number that is not

(See pages 7-1, 7-2.)

programmed.

PLS CLEAN DRUM

The primary corona wire of

Clean the primary corona

drum unit is dirty.

wire of drum unit.
(See page 22-22.)

PLS OPEN COVER

A page, piece of paper or

Open the front cover.

paper clip, etc. may be

If you see any jammed paper

jammed inside the MFC.

or other item, gently pull it
out, then close the front
cover. If the error message
remains, open and close the
front cover again. If the MFC
cannot reset itself and return
to the date and time prompt,
it will display MACHINE
ERROR XX. Please call
Brother Customer Service
and tell them the Machine
Error number, at:
USA:

1-800-284-4329

From within Canada:

1-800-853-6660

From within Montreal:

1-514-685-6464

PRINTER JAM

The paper is jammed  in the

See page 22-5.

MFC.

Содержание MFC 9600


































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды