![Brother MFC-9330CDW Скачать руководство пользователя страница 111](http://html.mh-extra.com/html/brother/mfc-9330cdw/mfc-9330cdw_basic-users-manual_54163111.webp)
Troubleshooting
101
B
Drum !
The corona wires on the drum
units must be cleaned.
Clean the corona wires on the drum units (see
The drum unit or the toner
cartridge and drum unit
assembly is not installed
correctly.
Put the toner cartridge into the drum unit that is
indicated on the Touchscreen. Then reinstall
the toner cartridge and drum unit assembly into
the machine.
Drum Stop
It is time to replace the drum
unit.
Replace the drum unit for the color indicated on
the Touchscreen. (see
Fuser Error
The temperature of the fuser
unit does not rise to a specified
temperature within the
specified time.
Press and hold down
to turn the machine
off, wait a few seconds, and then turn it on
again. Leave the machine idle for 15 minutes
with the power on.
The fuser unit is too hot.
Jam 2-sided
The paper is jammed
underneath the paper tray or
the fuser unit.
See
Paper is jammed underneath the paper
Jam Inside
The paper is jammed inside the
machine.
See
Paper is jammed inside the machine
Jam Manual Feed
The paper is jammed in the
manual feed slot of the
machine.
See
Paper is jammed in the manual feed slot
Jam Rear
The paper is jammed in the
back of the machine.
See
Paper is jammed at the back of the
Jam Tray
The paper is jammed in the
paper tray of the machine.
See
Paper is jammed in the paper tray
Limit Exceeded
The print limit set in Secure
Function Lock 2.0 was
reached.
Call your administrator to check your Secure
Function Lock Settings.
Log Access Error
The machine could not access
the print log file in the server.
Call your administrator to check the Store Print
Log to Network settings.
For more information, see Network User's
Guide:
Store Print Log to Network
Low Temperature
The room temperature is too
low for the machine to operate.
Increase the room temperature to allow the
machine to operate.
Manual Feed
Manual
was selected as the
paper source when there was
no paper in the manual feed
slot.
Place paper in the manual feed slot (see
Loading paper in the manual feed slot
No Belt Unit
The belt unit is not installed
correctly.
Reinstall the belt unit (see
No HUB Support
A USB hub device is
connected to the USB direct
interface.
Disconnect the USB hub device from the USB
direct interface.
Error Message
Cause
Action
Содержание MFC-9330CDW
Страница 1: ...Basic User s Guide MFC 9330CDW Version 0 TWN ENG ...
Страница 17: ...General information 7 1 ...
Страница 50: ...Chapter 5 40 i Press Fax Fax Tel External TAD or Manual j Press ...