Brother MFC-9320CW, Быстрая настройка

Страница: 33 / 49

33
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
Manual configuration from the control panel
17
Configure the wireless
settings
a
On your machine, press Menu , 7 (
Network
), 2
(
WLAN
), 2 (
Setup Wizard
).
Press 1 to choose
On
.
b
The machine will search for available SSIDs. If
a list of SSIDs is displayed, use
a
or
b
to
choose the SSID you wrote down in step 16-
b
on page 29, then press OK . Go to step
f
.
If your access point is set to not broadcast the
SSID you will have to manually add the SSID
name. Go to step
c
.
c
Press
a
or
b
to choose
<New SSID>
and press
OK . Go to step
d
.
d
Enter the SSID you wrote down in step 16-
b
on
page 29 using the dial pad to choose each
letter or number.
You can use
d
and
c
to move the cursor left and
right. For example, to enter the letter
a
, press
the 2 key on the dial pad once. To enter the
number
3
, press the 3 key on the dial pad
seven times.
The letters appear in this order: lower case,
upper case and then numbers.
(For more information, see
Entering Text for
Wireless Settings on page 47.)
Press OK when you have entered all the
characters.
e
Press
a
or
b
to choose
Infrastructure
,
then press OK .
f
Use the
a
,
b
and OK keys to choose one of the
options below: If your network is configured for
Authentication and Encryption you must match
the settings used for your network.
 No Authentication or Encryption:
Choose
Open System
, press OK then
choose
None
for
Encryption Type?
and
press OK . Then press 1 for
Yes
to apply
your settings. Go to step
k
.
 No Authentication with WEP Encryption:
Choose
Open System
, press OK then use
a
or
b
to choose
WEP
for the
Encryption Type?
and press OK .
Go to step
g
.
 Authentication with WEP Encryption:
Choose
Shared Key
and press OK .
Go to step
g
.
 Authentication with WPA/WPA2-PSK
(TKIP or AES) Encryption:
Choose
WPA/WPA2-PSK
and press OK .
Go to step
h
.
 Authentication with LEAP:
Choose
LEAP
, press OK . Go to step
i
.
 Authentication with EAP-FAST/NONE,
EAP-FAST/MS-CHAPv2, EAP-FAST/GTC
(TKIP or AES Encryption):
Choose
EAP-FAST/NONE
,
EAP-FAST/MSCHAP
(EAP-FAST/MS-
CHAPv2) or
EAP-FAST/GTC
, press OK . Go
to step
j
.
g
Choose the appropriate key number and press
OK . Enter the WEP key you wrote down in
step 16-
b
on page 29 using the dial pad to
choose each letter or number.
For example, to enter the letter
a
, press the 2
key on the dial pad once. To enter the number
3
, press the 3 key on the dial pad seven times.
The letters appear in this order: lower case,
upper case and then numbers.
(For more information, see
Entering Text for
Wireless Settings on page 47.)
Press OK when you have entered all the
characters, then press 1 for
Yes
to apply your
settings. Go to step
k
.
Note
It will take several seconds to display a list of
available SSIDs.