Brother MFC-760, Руководство пользователя

Страница: 57 / 159

48
C H A P T E R S I X
Press
Stop
to cancel. If the document was scanned into memory, press
1
to CLEAR it ––OR–– 2 to QUIT.
If memory is full, and you are faxing a single page, it will be sent in real
time.
You cannot use Scan Fax when the MFC is sending, receiving or printing
a fax.
Resolution
You can use the
Resolution
key before you send the fax. Press
Resolution continuously until you see the LEDs change.
Standard ––– Suitable for most typed documents. ( Fine and S.Fine
lights are OFF)
Fine ––––––– Good for small print; transmits a little slower than
Standard resolution. (Only the Fine light is ON)
Super Fine –– Good for very small print or artwork; transmits slower
than Fine resolution. (Only the
S.Fine
light is ON)
Photo –––––– Use when document has varying shades of grey; slow
transmission time. (Both
Fine
and
S.Fine
lights are ON)
Contrast
If your document is very light or very dark, you might want to set the
contrast accordingly. Use LIGHT to send a light document. Use DARK
to send a dark document.
1
Insert the document, face up, in the feeder, or on the scanner glass.
2
Press
Menu
,
1
,
3
,
3
.
3
Use or to select AUTO, LIGHT, or DARK.
4
When the screen displays your selection, press Set .
5
Press
2
if you are finished choosing settings, and go to Step 6 ––
OR–– Press 1 if you want to select additional settings. The display
returns to the SETUP SEND menu.
6
Enter a fax number and press
Start
to send a fax.
See
“Multiple
Resolution
Transmission”
in this
chapter