manualshive.com logo in svg

Brother MFC-760, Руководство пользователя

Поделиться
Скачать
Brother MFC-760 Скачать руководство пользователя страница 127

118

C H A P T E R

F I F T E E N

ERROR MESSAGE

CAUSE

ACTION

DOCUMENT JAM

Documents were not inserted or fed properly,

See Document Jam in this chapter.

or document was longer than 90 cm.

INK EMPTY XXXX

One or more of the ink cartridges is out of ink.

Replace the ink cartridges. See
Replacing the Ink Cartridges in this
chapter.

MACHINE ERROR XX

MFC has a mechanical problem

Cut the power off. Then contact your
Brother dealer for service.

MEMORY FULL

You can’t store data in the memory.

See Memory Full Message in chap. 11.

NEAR EMPTY XXXX

One or more of the ink cartridges is running

Order a new ink cartridge now.

out of ink.

NO RESPONSE/BUSY

The number you dialled does not answer or

Verify the number and try again.

is busy.

NOT ASSIGNED

You tried to access a One Touch or Speed Dial

Set up the One Touch or Speed Dial

number that is not programmed.

number. See chap. 8.

PLS OPEN COVER

A page, piece of paper or paper clip, etc.

Press the Scanner cover release button

may be jammed inside the MFC.

and lift the scanner cover. If you see any
jammed paper or other item, gently pull
it out, then close the scanner cover.
If the error message remains, open and
close the scanner cover again. If the
MFC cannot reset itself and return to the
date and time prompt, it will display
MACHINE ERROR XX. Then contact
your Brother dealer for service.

PRINTER JAM

The recording paper is jammed  in the MFC.

See Printer Jam in this chapter.

SET CARTRIDGES

An ink cartridge is not installed properly.

Re-install the ink, seating it  properly.
See Replacing Ink Cartridges in this
chapter.

WARMING UP

The print head detects low temperature.

Wait until the MFC warms up.

Содержание MFC-760
































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды