S-7200B
3. FUNCTION SETTINGS (OPERATION PANEL)
5
3-4. Setting functions
・
If the LOCK key icon (1) is on, release the lock before carrying out the following
operations.
・
If the MAX key icon (2) is on, press the MAX key to return the main display to stitch
number display (orange).
1
・
The main display will change to green and function setting
mode will be enabled.
2
・
Refer to the “Function List” to select the number for the
function that you would like to change the setting for.
3
・
Refer to the “Function List” to change the setting to a value
within the setting range.
4
・
The buzzer will sound for approximately 1 second, and then
the setting will be accepted.
・
The main display will return to the stitch number display
(orange).
(Press for 2 seconds or more)
NOTE:
・
If you depress the treadle before pressing the ENTER key, the main display will return to orange and the setting value
will not be changed.
・
If you change the function number after changing the setting value but before pressing the ENTER key, the setting
value will not be changed.
You need to press the ENTER key for each function number for the setting to be accepted.
Selecting the function number
Changing the setting value
2240M
2241M
2242M
2239M
2238M
Function no.
Setting value
Example:
Function
no.14
Example:
Setting value
1
Содержание MD-741B
Страница 58: ...S 7200B 10 CONTROL BOX AND MOTOR 51 Motor Serial No 2326M 2327M ...
Страница 82: ...S 7200B MEMO 75 ...
Страница 83: ...S 7200B MEMO 76 ...
Страница 84: ...SERVICE MANUAL S 7200B I6100914B 2007 03 B 1 Printed in Japan ...