- 20 -
ENGLISH
Corner cutting
After laminating, you can round each corner of the document.
(1)
Carefully insert a corner of the document all
the way into the corner-cutter slot so that the
corner of the laminated document is flush with
the sides of the corner cutter.
(2)
The machine will automatically trim the corner
of the document.
(3)
Remove the document from the slot.
Note
The maximum thickness of the original document (before lamination) that the corner cutter unit can cut is
0.008” (30 lbs. paper).
Do not use the corner cutter to trim magnetic back output.
