Brother Innov-is NV4000D, Руководство по обслуживанию

Страница: 252 / 381

3 - 120
Module Needle-presser module
21
Lever AB assembly attachment
1. Attach the retaining ring (E2) to the groove on the inside of the lever guide
shaft
1
.
2. Apply a light covering of EPNOC AP (N)0 to the surface of the lever guide
shaft
1
.
3. Place the lever AB assembly
2
onto the lever guide shaft
1
.
4. Apply a light covering of MOLYKOTE EM-30L to the slide groove
3
of
the unit holder.
5. Insert the lever guide shaft
1
into the shaft hole on the unit holder, and
then insert the slider
4
of the lever AB assembly
2
into the slide groove
3
of the unit holder.
6. Place the lever supporter plate
5
beneath the lever guide shaft
1
, and then
attach the lever supporter plate
5
to the unit holder with the screw
1
.
7. Attach the retaining ring (E2) to the lever guide shaft
1
from the rear of
the unit holder.
Start movie clip (CD-ROM version only)
Apply EPNOC AP (N)0 to the surface of the lever guide
shaft.
Light covering
1
Torque
0.58 – 0.78 N
·
m
1
1
1
Retaining ring E2
Retaining ring E2
3 2
4
5
Taptite, Pan B
M3X6
Color; Gold