Brother Innov-is 700E Скачать руководство пользователя

Страница: 2 / 88

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

IMPORTANT SAFETY INSTRUCTIONS

Please read these safety instructions before attempting to use the machine.

DANGER

- To reduce the risk of electric shock

Always

unplug the machine from the electrical outlet immediately after using, when cleaning,

when making any user servicing adjustments mentioned in this manual, or if you are leaving the
machine unattended.

WARNING

- To reduce the risk of burns, fire, electric shock, or injury to persons.

Always

unplug the machine from the electrical outlet when removing covers, lubricating, or

when making any adjustments mentioned in the instruction manual.

• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp

the plug and pull it out of the electrical outlet.

Do not

pull on the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.
•

Always

unplug your machine if the power is cut.

Never

operate this machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or water is spilled on the unit. Return the machine to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

Always

keep your work area clear:

• Never operate the machine with any air openings blocked. Keep ventilation openings of the

machine free from the build up of lint, dust, and loose cloth.

•

Do not

use extension cords. Plug the machine directly into the electrical outlet.

•

Never

drop or insert

any

object into

any

opening.

•

Do not

operate where aerosol (spray) products are being used or where oxygen is being

administered.

Special care is required when embroidering:

•

Always

pay close attention to the needle. Do not use bent or damaged needles.

• Keep fingers away from

all

moving parts. Special care is required around the machine needle.

• Switch the machine to the symbol “O” position to turn it off when making any adjustments in the

needle area.

•

Do not

use a damaged or incorrect needle plate, as it could cause the needle to break.

•

Do not

push or pull the fabric when embroidering.

Содержание Innov-is 700E

























































































Результаты поиска

Содержание Innov-is 700E

Отзывы:

Похожие инструкции для Innov-is 700E

Бренды по названию

Популярные бренды

Brother Innov-is 700E, Руководство по эксплуатации

Результаты поиска

Содержание Innov-is 700E

Отзывы:

Похожие инструкции для Innov-is 700E

Бренды по названию

Популярные бренды