manualshive.com logo in svg

Brother HL-P2000, Руководство по обслуживанию

Поделиться
Скачать
Brother HL-P2000 Скачать руководство пользователя страница 279

IV-38

  9.3

Scanner Error Indications

When an error occurs during scanning, the 

error indication

 is shown on the LED of the

scanner control panel.  Take an appropriate action referring to the table below;

Problem

LED Indication

Remedy

No document

Copy number
and ‘P’ are
displayed
alternately

1) Set the document.
The error is cleared automatically, and the copy
number is indicated.
The settings of the enlarge/reduce ratio and the
Photo mode which were set before the error are
remained (not returned to the default).
2) Press the Stop key.
The settings and indication are returned to the
default.

Document is mis-picked.

‘E’

1) Re-set the document.
When the document is removed, the scanner
settings and indication are returned to the
default.
2) Open the scanner cover.
When the scanner cover is opened, the regist
sensor and ADF sensor detect no document in
the ADF, and the error is cleared.
3) Press the Stop key.
The scanner settings and indication are returned
to the default.  Since the document is being set
in the ADF, ‘1’ is indicated.

Document jam

Longer document than
the specified size is set.

Copying is stopped by
the Stop key is pressed.

‘E’

1) Remove the document.
When the cover is opened, the regist sensor and
ADF sensor detect no paper in the ADF, and the
error is cleared.
When the document is removed without the
cover being opened, the regist sensor detects no
paper, and the error is cleared.
After that, the scanner settings are returned to
the default.
2) Press the Stop key.
The document is ejected.  After that, the scanner
settings are returned to the default.

Press the Copy key during
printing from PC

Ignore the key

Wait until printing is finished.

Press the Copy key during
scanning

Ignore the key

Wait until scanning is finished.

No paper loaded

‘E’ /
The Alarm
lamp on the
printer control
panel is ON.

1) Load the paper.
After that, press the button on the printer control
panel.  The error is cleared automatically, and
the printer continues copying.

2) Press the Stop key.
The document is ejected, then the scanner
settings are returned to the default.  The printer
does not continue printing.

Direct copy memory full

‘E’

Press the Stop key.
The document is ejected, then the scanner
settings are returned to the default.

PR98221

Содержание HL-P2000







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды