manualshive.com logo in svg

Brother HL-P2000, Руководство по обслуживанию

Поделиться
Скачать
Brother HL-P2000 Скачать руководство пользователя страница 175

v

Definitions of Warnings, Cautions, and Notes

The following conventions are used in this User’s Guide:

 

Warning

Indicates warnings that must be observed to prevent possible
personal injury.

!

 

Caution

Indicates cautions that must be observed to use the machine properly or
prevent damage to the machine.

✒

Note

Indicates notes and useful tips to remember when using the machine.

To Use the Machine Safely

 

Warning

After you have just used the machine, some internal parts of the
machine are extremely hot. When you open the top cover, never
touch the shaded parts shown in the following illustration.

 

High Temperature

Inside the Machine

 

Warning

There are high voltage electrodes inside the machine. Before cleaning
the machine, make sure to turn off the power switch and unplug the
power cord from the power outlet.

Turning off the Switch and Unplugging the Machine

Содержание HL-P2000







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды