Brother HL-2600CN Series Скачать руководство пользователя страница 140

Страница: 140 / 491

2009/06/29

CHAPTER 3 "PCL5C" - 12

4. COLOR

GRAPHICS

4.1. Start Raster Transfer

Command

ESC*r#A (27)(42)(114)#(65) <1Bh><2Ah><72h>#<41h>

# = 0 *

Prints the image from the left edge of the logical page.

= 1

Prints the image from the current cursor position.

= 2

Executes scaling. Prints the image from the left edge of the logical
page.

= 3

Executes scaling. Prints the images from the current cursor position.

* Default value = 0

•

This command signals the start of the transfer of raster image data to the printer.

•

The transfer of raster data to the printer continues until either an

End Raster Transfer

command is sent or a

command other than

Send Raster Data

Set Compression Mode

Y-Offset

is sent.

•

The source width and height are set by the

Set Raster Area Width

(

ESC*r#S

) and

Set Raster Area Height

(

ESC*r#T

) commands. When the # value is 2 or 3, the data with these source width/height values is

enlarged or reduced to the width and height set by the

Set Destination Raster Width

and

Set Destination

Raster Height

commands. (Refer to the following sections.)

4.2. Set Destination Raster Width

Command

ESC*t#H (27)(42)(116)#(72) <1Bh><2Ah><74h>#<48h>

Range = 0 ~ 32767 (number of decipoints in 1/720”)
Default value = 0

•

If value 2 or 3 is sent with the

Start Raster Transfer

command and graphic scaling is set, this command sets

the destination width.

•

Values outside the range are invalid.

•

If the setting is 0 or is omitted, this command uses the same width as the source width.

•

If the specified width is wider than the page, drawings are clipped by the right physical page boundary.
The scaling factor is dealt with correctly.

4.3. Set Destination Raster Height

Command

ESC*t#V (27)(42)(116)#(86) <1Bh><2Ah><70h>#<56h>

Range = 0 ~ 32767 (number of decipoints in 1/720”)
Default value = 0

•

If value 2 or 3 is sent with the

Start Raster Transfer

command and graphic scaling is set, this command sets

the destination height.

•

Values outside the range are invalid.

•

If the setting is 0 or is omitted, this command uses the same height as the source height.

•

If the specified height is longer than the page, drawings are clipped by the bottom of physical page boundary.
The scaling factor is dealt with correctly.

Содержание HL-2600CN Series












































































































































































































































































































































































































































































































Результаты поиска

Содержание HL-2600CN Series

Отзывы:

Brother HL-2600CN Series, Техническое справочное руководство, Страница: 140 / 491

Результаты поиска

Содержание HL-2600CN Series

Отзывы: