Printing Methods
9
2
e
Check that the paper is below the maximum paper mark (
b
).
Note
• Paper jams may occur if you put more than 250 sheets (80 g/m
2
or 21 lb) of plain or bond paper in the
paper tray at any one time.
• Paper jams may occur if you put more than 10 transparencies in the paper tray at any one time.
• When you use pre-printed paper, put the side that is going to be printed on (blank side) face down, with
the top of the paper at the front of the tray.
f
Put the paper tray firmly back in the printer. Check that it is completely in the printer.
g
Lift up the support flap to prevent paper from sliding off the face-down output tray.
Note
If you choose not to lift up the output tray support flap, we recommend that you remove printed pages
immediately after they come out of the printer.
h
Send the print data to the printer.
Note
If you print on transparencies, remove each transparency immediately. Stacking the printed
transparencies may cause a paper jam or the transparency to curl.
