Brother hl 1650 - B/W Laser Printer, Руководство по обслуживанию

Страница: 130 / 289

4-32
(14) Remove the cleaner ASSY H complete with the cleaner spring 30 from the FU frame
upper by lifting it upwards until the spring releases from the frame.
(15) Remove the cleaner spring 30 from the cleaner ASSY H.
Fig. 4-58
NOTE:
When re-assembling the cleaner ASSY H complete with the cleaner spring 30 onto the FU
frame upper, ensure
•
that the direction of the roller is correct referring to the figure above.
• that the spring is seated correctly in the locating channel and does not protrude from either
end.
• to push down the cleaner ASSY H to hook it onto the FU frame upper, and then fit the heat
roller 25 and release the hook of the cleaner ASSY H so that the cleaner ASSY H contacts
the surface of the heat roller 25.
FU frame upper
Cleaner spring 30
Cleaner ASSY H