Brother TN-1050, HL-1110, HL-
1112
insert new
cover
Brother TN-1050, HL-1110, HL-1112
New Cover
Used
Страница 1: ...tridge you must first cut off the small spot weld Figure 1 After you have cut this off you can also remove the sealing plug Take a small spatula or other flat tool and carefully pry open the stopper Figure 2 and set it aside Brother TN 1050 HL 1110 HL 1112 Cut Spotweld and remove the filler cap Brother TN 1050 HL 1110 HL 1112 VERY IMPORTANT Before you fill your toner cartridge you have to remove t...
Страница 2: ...wn the toner level every time you print You need to insert the reset lever and a new side cover if you want to refill a starter cartridge to be used when buying a printer Replenished toner cartridges already have the reset lever and the new cover and only need to be reset in this case Loosen the two screws on the side cover Figure 4 The side cover is now only attached with two barbs Loosen the two...
Страница 3: ...er Please note that you can not reuse the side of the starter cartridge and replace it with the new cover The difference between the old and the new cover is that the new cover has a recess for the reset lever As a result the reset lever can perform its services without problems and reliably shows you when the toner cartridge is empty again Take the new cover and replace it in the same position Fi...
Страница 4: ...Brother TN 1050 HL 1110 HL 1112 insert new cover Brother TN 1050 HL 1110 HL 1112 New Cover Used ...
