Brother TN-1050, HL-1110, HL-1112
Barbs Release
Brother TN-1050, HL-1110, HL-1112
Remove Gear
Brother TN-1050, HL-1110, HL-1112
Reset the lever to
position showed this will zero the count
Brother TN-1050, HL-1110, HL-1112
Replace The Gear
Inserting the new side cover
:
After inserting the reset lever and returning it to full, you can replace the side cover. Please note
that you can not reuse the side of the starter cartridge and replace it with the new cover. The
difference between the old and the new cover is that the new cover has a recess for the reset lever.
As a result, the reset lever can perform its services without problems and reliably shows you when
the toner cartridge is "empty" again.
Take the new cover and replace it in the same position (Figures 10 and 11). Tighten the cover with
the two screws again. Now you can put your toner cartridge back in the printer and continue
printing as usual.
