Brother HE1 Скачать руководство пользователя | Manualshive

Страница: 3 / 92

background image

1

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Introduction

Thank you for purchasing this embroidery machine. Before using this machine, carefully read the "IMPORTANT
SAFETY INSTRUCTIONS", and then study this manual for the correct operation of the various functions.
In addition, after you have finished reading this manual, store it where it can quickly be accessed for future
reference.

IMPORTANT SAFETY INSTRUCTIONS

Please read these safety instructions before attempting to use the machine.

DANGER

- To reduce the risk of electric shock

1

Always

unplug the machine from the electrical outlet immediately after using, when cleaning,

when making any user servicing adjustments mentioned in this manual, or if you are leaving the
machine unattended.

WARNING

- To reduce the risk of burns, fire, electric shock, or injury to persons.

2

Always

unplug the machine from the electrical outlet when removing covers, lubricating, or

when making any adjustments mentioned in the instruction manual.

• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp

the plug and pull it out of the electrical outlet.

Do not

pull on the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.
•

Always

unplug your machine if the power is cut.

3

Never

operate this machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or water is spilled on the unit. Return the machine to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

• While the machine is stored or in use if you notice anything unusual, such as an odor, heat,

discoloration or deformation, stop using the machine immediately and unplug the power cord.

• When transporting the machine, be sure to carry it by its handle. Lifting the machine by any other

part may damage the machine or result in the machine falling, which could cause injuries.

•

When lifting the machine, be careful not to make any sudden or careless movements, otherwise

you may injure your back or knees.

4

Always

keep your work area clear:

•

Never

operate the machine with any air openings blocked. Keep ventilation openings of the

machine free from the build up of lint, dust, and loose cloth.

•

Do not

use extension cords. Plug the machine directly into the electrical outlet.

•

Never

drop or insert

any

object into

any

opening.

•

Do not

operate where aerosol (spray) products are being used or where oxygen is being

administered.

«
1
2
3
4
5
...
»

Содержание HE1





























































































Отзывы:

Нет отзывов

Похожие инструкции для HE1

Бренд: Happy Страницы: 30

Бренд: Singer Страницы: 8

Бренд: Mitsubishi Страницы: 61

Бренд: Toyota Страницы: 55

Бренд: EVA Страницы: 56

Бренд: ROOTS Страницы: 164

3001 Silent Drive

Бренд: ProForm Страницы: 16

SureBind System One

Бренд: GBC Страницы: 34

Бренд: Singer Страницы: 15

Бренд: Weslo Страницы: 24

Бренд: A-S-S Страницы: 7

Бренд: Lavor Страницы: 10

Бренд: Oki Страницы: 137

Бренд: KLINDEX Страницы: 32

Бренд: T-COM Страницы: 6

Бренд: Happy Страницы: 98

Бренд: JUKI Страницы: 4

Бренд: Black & Decker Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды