manualshive.com logo in svg

Brother E-100, Руководство по эксплуатации

Поделиться
Скачать
Brother E-100 Скачать руководство пользователя страница 28

21

●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ● 

MAKING AN EMBROIDERED APPLIQUÉ FROM A ONE-POINT PATTERN

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

●

●

7.

Finishing the appliqué

In order to prevent threads from being pulled out, attach the iron-on adhesive film to the wrong side 
of the embroidery. Then, cut the embroidery into any shape you want.

1

Place the right side of the embroidery face 
down. Then, completely cover the threads 
with the iron-on adhesive, making sure that 
the printed backing paper faces up.

Make sure that the backing paper is on the top.

1

Ironing board

2

Pre-cut design fabric (wrong side facing up)

3

Iron-on adhesive (printed backing paper facing up)

2

Be sure to heat the iron to a medium 
temperature of 285 to 320 

F (140 to 160 

C) and not to use the steam setting. Then, 

press the iron down for 30 to 40 seconds on 
the backing paper of the iron-on adhesive.

 CAUTION

•

Before the iron-on adhesive film is attached, the embroidery threads can easily be pulled 
out. Be careful not to pull them out.

 NOTE

•

A reference line of stitching is sewn around the 
pattern so the pattern can be cut out more easily.

1

Reference line of stitching (line that shows how to 
cut out the embroidery)

•

The reference line may not be sewn around all 
patterns.

•

If you do not want to cut out the embroidery 
along the reference line, carefully take out the reference line threads before ironing on 
the adhesive film.

 NOTE

•

If some of the adhesive melts onto the iron, wait until the iron cools down, and then peel 
off the adhesive.

1

1

2

3

Содержание E-100



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды