4. LUBRICATION
RH-9800
12
4.
LUBRICATION
CAUTION
Turn off the power switch before starting lubricating, otherwise the machine may operate if the start switch is
pressed by mistake, which could result in injury.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not
get into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and
diarrhoea.
Keep the oil out of the reach of children.
Use only specified Brother oil (Nisseki Mitsubishi Sewing Lube 10 N; VG10) for the machine oil.
4-1. Adding oil
Check the oil level by looking at the sight glass. If the oil level is low, replenish the oil supply.
Filling the arm oil tank
Filling the bed base oil tank
4-2. Lubrication
Oil these parts once a day.
Oil the moving parts of the needle bar, looper and spreader mechanisms and also the cam groove, roller, the felt at the
base of the wick and the wick before using the sewing machine for the first time, and also after long periods of non-use.
When oiling, some oil will get onto the thread. Carry out a test sewing to ensure that your material does not get stained
with oil.
Oiling the needle bar and cam
Add 2-3 drops of oil in the places indicated by the arrows.
(1)
(2)
0859Q
0860Q
1. Pour approximately 10 cc of machine oil into the arm oil
tank (1) (until it is about four-fifths full).
1. Raise the machine head.
2. Pour approximately 20 cc of machine oil into the bed
base oil tank (2) (until it is about four-fifths full).
3. Lower the machine head.
0861Q
