Brother DCP 8040 - B/W Laser - All-in-One, Руководство по обслуживанию

Страница: 341 / 362

APPENDIX 3 FIRMWARE SWITCHS (WSW)
A-48
WSW46 (Monitor of PC ON/OFF state)
Selector
No.
Function Setting and Specifications
1
2
Monitoring the PC ON/OFF state
No. 1 2
0 0 : Disabled
0 1 : Monitor SELECT IN
1 0 : Monitor STROBE
1 1 : Monitor both SELECT IN and
STROBE
3
Parallel port output pins kept at high
level
0: Enabled 1: Disabled
4
Scanned garbage correction
processing
0: ON 1: OFF
5
|
8
Not used.
NOTE:
•
Selector 3 is applicable only to models equipped with a parallel interface.
•
Selectors 6 through 8 are applicable only to models equipped with a flat-bed scanner.
l Selectors 1 and 2: Monitoring the PC ON/OFF state
For the related functions, refer to WSW36, selectors 2 and 3.
l Selectors 3: Parallel port output pins kept at high level
Setting this selector to “0” will keep all parallel output pins of the facsimile equipment at high
level. Use this setting if Resource Manager (bundled with MFC models) installed to Windows
NT running on the connected PC fails to monitor the power ON/OFF state of the facsimile
equipment.
WSW47 (Function setting 22)
Selector
No.
Function Setting and Specifications
1
|
7
Not used.
8
Switching of USB High/Full Speed
0: Auto (Automatic switching)
1: Full speed is set.