Brother DCP 8040 - B/W Laser - All-in-One Скачать руководство пользователя страница 282

Страница: 282 / 362

CHAPTER 7 MAINTENANCE MODE

7-16

3.10

Received Data Transfer Function (Maintenance mode 53)

(MFC-8440/8840D/8840DN only)

< Function >

This function is to transfer received data to another FAX equipment when the machine fails

to print out the data because of a recording system failure.

NOTE:

•

The maximum number of files to be transferred at a time is 99. If there are 100 files or

more, you need to perform this function more than once.

•

If both color data and monochrome data exist, monochrome data is transferred first. If

the receiving end does not support color, color data cannot be transferred, resulting in
an error.

< Operating Procedure >

(1) Press

the

and

keys in this order in the initial stage of the maintenance mode.

The “FAX TRANSFER” will appear on the LCD.

(2) Press

the

key to display the number of received documents.

The “1. NO. OF JOBS” will appear.

Press the

Set

button, and then the number of received documents is displayed: e.g.,

“NO. OF JOBS: 10.”

(3) Press

the

key to transmit an activity report.

The “2. ACTIVITY” will appear.

Press the

key to transfer received data. (It is transferred with an activity report

attached.)

The “3. DOCUMENTS” will appear. If no received data exists, “NO DOCUMENT” will
appear.

(4) Press

the

Set

button while the “2. ACTIVITY” or “3. DOCUMENTS” is displayed.

The “ENTER NO. & SET” will appear.

(5) Enter a phone number of the receiving end to which data will be transferred, and then

press the

Set

button.

NOTE:

Be sure to enter a phone number directly from the numeric keypad. One-touch dialing

functions cannot be used for this function.

The “ACCEPTED” is displayed for approx. 2 sec., and then the machine starts dialing.

The transferred data does not include the transmission terminal ID. Instead, a cover
page and an end page as shown on the next page are automatically attached.

Содержание DCP 8040 - B/W Laser - All-in-One











































































































































































































































































































































































Результаты поиска

Содержание DCP 8040 - B/W Laser - All-in-One

Отзывы:

Бренды по названию

Популярные бренды

Brother DCP 8040 - B/W Laser - All-in-One, Руководство по обслуживанию

Результаты поиска

Содержание DCP 8040 - B/W Laser - All-in-One

Отзывы:

Бренды по названию

Популярные бренды