Brother DCP-7030 Скачать руководство пользователя | Manualshive

Страница: 54 / 108

background image

42

FDA regulations

A

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the
United States. The following label on the back of the machine indicates compliance with the FDA
regulations and must be attached to laser products marketed in the United States.

WARNING

Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous invisible radiation exposure.

Internal laser radiation

Max. Radiation Power: 10 mW

Wave Length: 780 – 800 nm

Laser Class: Class 3B

Important safety instructions

A

1 Read all of these instructions.

2 Save them for later reference.

3 Follow all warnings and instructions marked on the product.

4 Unplug this product from the wall outlet before cleaning inside of the machine. DO NOT use

liquid or aerosol cleaners. Use a damp cloth for cleaning.

5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing

serious damage to the product.

6 Slots and openings in the cabinet at the back or bottom are provided for ventilation. To ensure

reliable operation of the product and to protect it from overheating, these openings must not
be blocked or covered. The openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should never be placed near or over a radiator
or heater. This product should never be placed in a built-in installation unless proper ventilation
is provided.

7 This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact
a qualified electrician.

Manufactured:

Brother Industries (Vietnam) Ltd.

Phuc Dien Industrial Zone Cam Phuc Commune, Cam giang Dist Hai Duong Province, Vietnam.

This product complies with FDA performance standards for laser products except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.

«
...
52
53
54
55
56
...
»

Содержание DCP-7030













































































































Отзывы:

Нет отзывов

Похожие инструкции для DCP-7030

Бренд: Canon Страницы: 4

Бренд: Lexmark Страницы: 2

Бренд: Konica Minolta Страницы: 61

Бренд: HPRT Страницы: 2

AccurioPrint 2100

Бренд: Konica Minolta Страницы: 32

Бренд: POS-TECHNOLOGY Страницы: 40

Бренд: Tally Страницы: 106

Magicolor 4650DN

Бренд: Konica Minolta Страницы: 260

Бренд: WOOSIM Страницы: 25

Бренд: Ricoh Страницы: 5

Бренд: Kyocera Страницы: 92

Phaser 6128 MFP

Бренд: Xerox Страницы: 4

CX4400 - Stylus Color Inkjet

Бренд: Epson Страницы: 36

Бренд: Star Micronics Страницы: 1

Бренд: Star Micronics Страницы: 1

Бренд: Star Micronics Страницы: 1

mC-Print3 MCP31L

Бренд: Star Micronics Страницы: 2

Бренд: Star Micronics Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды