Brother DCP-1000, Руководство по обслуживанию, Страница: 122 / 222

5-16
5.3.10 CCD Scanner Area Setting
Function
The machine sets the CCD scanner area and stores it into the EEPROM.
Operating Procedure
(1) Press the 5 key twice in the initial stage of the maintenance mode.
The "SCANNER AREA SET" will appear on the LCD.
The machine checks and sets the area to be scanned.
If no error is noted, the machine returns to the initial stage of the maintenance mode.
If any error is noted, the "SCANNER ERROR" will appear on the LCD. To return the
machine to the initial stage of the maintenance mode, press the
Stop key.
5.3.11 EEPROM Customizing
Function
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings. The customizing codes list is given in Appendix 1.
NOTE: If you replace the main PCB, be sure to carry out this procedure.
Operating Procedure
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 9001 in the case of MFC6800 USA version) appears.
(2) Enter the desired customizing code (e.g., 0002 in the case of MFC6800 Canadian version).
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(3) For machines w/ fax: Press the Fax Start key.
For machines w/o fax: Press the Sort key.
The machine saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop key or no keys are pressed for one minute in the above procedure, the
machine stops the procedure and returns to the initial stage of the maintenance mode.