Brother DCP-1000, Руководство по обслуживанию, Страница: 110 / 222

5-5
5.3.2 Printout of Scanning Compensation Data
Function
The machine prints out the white and black level data for scanning compensation.
Operating Procedure
Do not start this function merely after powering on the machine but start it after carrying out a
sequence of scanning operation. Unless the machine has carried out any scanning operation, this
function cannot print out correct scanning compensation data. This is because at the start of
scanning operation, the machine initializes white and black level data and takes in the scanning
compensation reference data.
(1) Press the 0 and 5 keys in this order in the initial stage of the maintenance mode.
The "WHITE LEVEL 1" will appear on the LCD.
(2) The machine prints out the scanning compensation data list containing the following:
a) A/D converter reference level for high value (3 bytes for green, blue, and red)
b) A/D converter reference level for low value (3 bytes for green, blue, and red)
c) Dark level offset data (3 bytes for green, blue, and red)
d) Gain control data (3 bytes for green, blue, and red)
e) Voltage division data (3 bytes for green, blue, and red)
f) Compensation data for background color (1 byte)
g) 2-value quantization black level data (3 bytes for green, blue, and red)
h) 2-value quantization white level data (4912 bytes for green)
i) 2-value quantization white level data (4912 bytes for blue)
j) 2-value quantization white level data (4912 bytes for red)
(3) Upon completion of recording of the compensation data list, the machine returns to the initial
stage of the maintenance mode.
NOTE: If any data is abnormal, its code will be printed in inline style, as shown on the next page.