7
OPERATING INSTRUCTIONS
HOW TO ADJUST THE HANDLE
The handle of this vacuum cleaner can be
set to any of three positions: Upright,
Normal or Parallel.
To release the handle, depress the pedal
at the right rear corner of the vacuum
cleaner. (Fig. 6)
Upright position
Normally the handle is locked in this po-
sition for storage or when using the On
Board Tools. By pushing the handle for-
ward until the handle is locked, this
vacuum cleaner will stand on its legs and
wheels. (Fig. 7)
Normal position
This position is used for normal cleaning.
(Fig. 8)
Fig.6
Parallel position
This position is used for cleaning under
furniture.
To rotate to the Parallel position, depress
the pedal again. (Fig. 9)
EDGE CLEANING
These models have “Edge Cleaning ” for the
cleaning of carpet edges near baseboards and
stationary furniture. (Fig. 10)
Fig.7
Fig.8
Fig.9
Fig.10
Pedal
Legs
CT1200/CT1500Layout
1.3.8, 4:02 PM
7
