Brother CE-8080PRW, Руководство по обслуживанию

Страница: 125 / 196

3 - 78
Feed and rotary module Application of Assembly
20
Attachment of Feed dog
1. Set the feed dog
1
to the feed bar
2
, and then tighten the 2 screws
1
temporarily.
*Key point
• Fully tighten the screw
1
after performing "4 - 19 Adjustment :
Front/back and left/right position of feed dog".
1
Torque
Hand start
1
1
2
Screw, Bind
M 3X6
21
Attachment of Needle plate A assy
1. Set the needle plate A assy. 1 to the feed and rotary module with the 2
screw needle plates
2
.
2
1
21-1Assembly of Needle plate A assy
1. Set the F gear stopper plate 1 to the needle plate A 2 with the 2 screws 1 .
*Key point
• Check that the boss part of the F gear stopper plate 1
engaged with the positioning hole of the needle plate A
2
.
2. Set the stopper plate
3
and the needle plate B support plate
4
to the
needle plate A assy.
2
with the 2 screws
2
.
*Key point
• Check that the boss of the stopper plate
3
engaged with the
positioning hole of the needle plate A 2 .
3. Set the needle plate holder
5
to the needle plate A assy.
2
with the 2
screws 3 .
1
2
3
Torque
0.59 – 0.78 N·m
2 3
1 1 3
4 2
2 5
Screw, Bind
M 2.6X3