Brother BE-1204B Скачать руководство пользователя страница 181

Страница: 181 / 262

BE-1204B-BC • BE-1204C-BC • BE-1206B-BC

6-55

Chapter 6 Embroidering

Stepping Forward/Back

Steps forward/back the stitches actually.

The functions of icons are as follows:

W0927Q

Returns to the start position. For repeating patterns, returns to the start position of the current pattern.

Moves backward by the specified distance continuously. Click

to stop movement.

Moves backward by the specified distance.

Click this to stop after clicking

Moves forward by the specified distance.

Moves forward by the specified distance continuously. Click

to stop movement.

This is selected for repeating patterns. The machine goes to the start position of the next pattern.

Specify the travel length from the embroidery start point.

Selection of movement to the start position. The needle moves as follows:

W1162Q

W1163Q

W1164Q

Click the

icon and the

needle moves to the start

position of the current

Click the

icon

and the needle

moves to the start

position of the next

repeating pattern.

Содержание BE-1204B







































































































































































































































































Результаты поиска

Содержание BE-1204B

Отзывы:

Brother BE-1204B, Инструкция по эксплуатации, Страница: 181 / 262

Результаты поиска

Содержание BE-1204B

Отзывы: