5. USING THE OPERATION PANEL (BASIC OPERATIONS)
BAS-300G, BAS-311G, BAS-326G
30
2nd step
5-6. Checking the sewing pattern
Use test feed mode to check the needle movement with only the feed mechanism operating.
Check that the needle hole does not come out from the frame of the work clamp.
1
TEST indicator illuminates
Press the TEST key.
2
COUNTER indicator illuminates
Select the program number to be checked, and then set the X-scale and
the Y-scale.
•
The program number will flash.
Depress the foot switch to the 2nd step.
(If using a two-pedal foot switch, lower the work clamp before depressing
the start switch.)
•
The feed mechanism will move to the home position and the program
number will stop flashing and illuminate steadily.
•
The number of stitches will appear in the menu display.
Starting continuous test feed mode
Depress the foot switch to the 2nd step and then release it.
(If using a two-pedal foot switch, lower the work clamp before depressing
the start switch and releasing it.)
•
Feed mechanism starts moving continuously one stitch at a time.
[Fast-forward test mode]
If you depress the foot switch to the 1st step while the feed mechanism is
moving, the feeding speed will become faster while the foot switch is being
depressed. (If using a two-pedal foot switch, depress the work clamp
switch.)
TEST indicator illuminates
If you press the key, the feed mechanism will move
forward one stitch at a time, and if you press the
key, the feed mechanism will move backward one
stitch at a time. (The feed will move quicker if you
keep the key pressed down.)
TEST indicator switches off
If you would like sewing to start while test feeding is in
progress, press the TEST key to switch off the TEST
indicator.
When you depress the foot switch to the 2nd step,
sewing will start. (If using a two-pedal foot switch,
depress the start switch.
）
3
4
If test feeding continues to the final stitch,
it will then stop.
TEST indicator switches off
Press the TEST key.
4957Q
2nd step
4441Q
4441Q
1st step
2nd step
4443Q
4441Q
