Brother 888-M20, Руководство по эксплуатации

Страница: 37 / 100

Stitch Chart
35
V
A
R
IOU
S ST
IT
C
H
ES
3
■
Utility stitches
*
Twin needle can be used by attaching zigzag foot “J”.
Chapter
3
VARIOUS STITCHES
Stitch Chart
Memo
• The stitches shown in the tables and some of the
illustrations may differ slightly from the stitch patterns
displayed in the LCD.
• When any of the following stitches are selected,
pressing (Reverse/Reinforcement stitch button) will
sew reverse stitches.
When any other stitch is selected, pressing
(Reverse/Reinforcement stitch button) will sew
reinforcement stitches.
• , , or in some of the illustrations shows the
needle position of the stitch.
Note
• The walking foot can only be used with straight or
zigzag stitch patterns. Do not sew reverse stitches with
the walking foot.
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual
(J)
1-01*
Straight stitch (Left)
General sewing, gather,
pintuck, etc.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-02*
Straight stitch (Left)
General sewing, gather,
pintuck, etc.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-03*
Straight stitch (Middle)
General sewing, gather,
pintuck, etc.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-04*
Straight stitch (Middle)
General sewing, gather,
pintuck, etc.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
No. 1-01 1-03 1-08
Stitch
1
Left needle position
2 Middle (center) needle position
3
Right needle position
a
b
c
(J)
1-05*
Triple stretch stitch
General sewing for
reinforcement and
decorative topstitching
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 5.0
(1/64 - 3/16)
(J)
1-06*
Stem stitch
Reinforced stitching,
sewing and decorative
applications
1.0 (1/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 5.0
(1/64 - 3/16)
(J)
1-07
Basting stitch
For basting.
If the basting threads fall
out of the fabric, pull up
the bobbin thread before
sewing, and then pull the
upper thread and bobbin
thread under the presser
foot toward the back of the
machine (page 20). Hold
the upper thread and
bobbin thread when
beginning to sew, and
when finished sewing, cut
the threads leaving an
excess amount of thread.
Finally, hold the upper
thread and bobbin thread
at the beginning of the
stitching while arranging
the fabric.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
-
(J)
1-08*
Zigzag stitch
For overcasting, mending.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
1.4 (1/16)
0.0 - 5.0
(0 - 3/16)
(J)
1-09*
Zigzag stitch
For overcasting, mending.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
1.4 (1/16)
0.0 - 5.0
(0 - 3/16)
(J)
1-10*
Zigzag stitch (Right)
Start from right needle
position, zigzag sews to
left.
3.5 (1/8)
2.5 - 5.0
(3/32 - 3/16)
1.4 (1/16)
0.3 - 5.0
(1/64 - 3/16)
(J)
1-11*
2 steps elastic zigzag
stitch
Overcasting (medium
weight and stretch fabrics),
tape and elastic
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.0 (1/16)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-12*
3 steps elastic zigzag
stitch
Overcasting (medium,
heavyweight and stretch
fabrics), tape and elastic
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.0 (1/16)
0.2 - 5.0
(1/64 - 3/16)
(G)
1-13
Overcasting stitch
Reinforcing of light and
medium weight fabrics
3.5 (1/8)
2.5 - 5.0
(3/32 - 3/16)
2.0 (1/16)
0.4 - 5.0
(1/64 - 3/16)
(G)
1-14
Overcasting stitch
Reinforcing of heavyweight
fabric
5.0 (3/16)
2.5 - 5.0
(3/32 - 3/16)
2.5 (3/32)
0.4 - 5.0
(1/64 - 3/16)
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual