Brother 888-E33 Скачать руководство пользователя страница 11

Страница: 11 / 76

KNOWING YOUR SEWING MACHINE

USING YOUR SEWING

MACHINE

Power supply precautions

Be sure to observe the following precautions
concerning the power supply.

WARNING

• Use only regular household electricity for the

power source. Using other power sources may

result in fire, electric shock, or damage to the

machine.

• Make sure that the plugs on the power cord

are firmly inserted into the electrical outlet

and the power supply jack on the machine.

Otherwise, a fire or electric shock may result.

• Do not insert the plug on the power cord into

an electrical outlet that is in poor condition.

• Turn off the main power and remove the plug

in the following circumstances:

· When you are away from the machine

· After using the machine

· When the power fails during use

· When the machine does not operate

correctly due to a bad connection or a

disconnection

· During electrical storms

CAUTION

• Use only the power cord included with this

machine.

• Do not use extension cords or multi-plug

adapters with many other appliances plugged

in to them. Fire or electric shock may result.

• Do not touch the plug with wet hands. Electric

shock may result.

• When unplugging the machine, always turn off

the main power first. Always grasp the plug

to remove it from the outlet. Pulling on the

cord may damage the cord, or lead to fire or

electric shock.

• Do not allow the power cord to be cut,

damaged, modified, forcefully bent, pulled,

twisted, or bundled.

Do not place heavy objects on the cord. Do

not subject the cord to heat. These things may

damage the cord and cause fire or electric

shock. If the cord or plug is damaged, take the

machine to your authorized dealer for repairs

before continuing use.

• Unplug the power cord if the machine is not to

be used for a long period of time. Otherwise a

fire may result.

Power supply

Insert the plug into a wall outlet.

Main power

switch

Jack/socket

connector

Set the main power switch to “I”.

The sewing light comes on when the
machine is turned on.

Memo

• When the machine is turned on, the needle

and the feed dogs will make sound when

they move; this is not a malfunction.

To turn off the machine, set the main power
switch to “



”.

The sewing light goes off when the machine

is turned off.

Note

• If a power outage occurs while the sewing

machine is being operated, turn off the sewing

machine and unplug the power supply cord.

(For U.S.A. only)

• This appliance has a polarized plug (one blade

wider than the other). To reduce the risk of

electric shock, this plug is intended to fit in a

polarized outlet only one way. If the plug does

not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician

to install the proper outlet. Do not modify the

plug in any way.

Foot controller

Insert the foot controller plug into its jack/socket.

Foot controller jack/socket

Содержание 888-E33













































































Результаты поиска

Содержание 888-E33

Отзывы:

Похожие инструкции для 888-E33

Бренды по названию

Популярные бренды

Brother 888-E33, Руководство по эксплуатации

Результаты поиска

Содержание 888-E33

Отзывы:

Похожие инструкции для 888-E33

Бренды по названию

Популярные бренды