Brother 885-E33 Скачать руководство пользователя страница 16

Страница: 16 / 72

KNOWING YOUR SEWING MACHINE

(For models equipped with the sewing speed
controller)
Slide the sewing speed controller back to its
original position.

Memo

• When the sewing machine is started or the

handwheel is turned after winding the thread

around the bobbin, the machine will make a

clicking sound; this is not a malfunction.

• The needle bar does not move when you slide the

bobbin winding shaft to the right.

Lower threading

Install the bobbin wound with thread.
• For more details on quick-set bobbin, see page 15.

CAUTION

• Winding the bobbin improperly may cause the

thread tension to loosen, breaking the needle

and resulting in injury.

Wound evenly

Wound poorly

• Make sure you turn the power off while

threading the machine. If you accidentally step

on the foot controller and the machine starts

to sew, you could be injured.

Memo

• The direction for feeding

the bobbin thread is

indicated by marks on

the needle plate cover.

Be sure to thread the

machine as indicated.

Raise the needle to its highest position

by turning the handwheel toward you

(counterclockwise) or press (needle

position button) (for models equipped with

the needle position button), and raise the

presser foot lever.

Turn off the sewing machine.

Slide the button and open the cover.

Cover

Slide button

Put the bobbin in so the thread comes out in
the direction shown by the arrow.

CAUTION

• Make sure you set the bobbin so the thread

unrolls in the right direction. If the thread

unrolls in the wrong direction, it may cause

the thread tension to be incorrect or break the

needle.

Hold the end of the thread, push the bobbin
down with your finger, and then pass the
thread through the slit, as shown.
• If the thread is not correctly inserted, it may

cause incorrect thread tension (page 26).

Replace the bobbin cover.

• Replace the cover so that the end of the

thread comes out from the left side of the
cover (as shown by the line in the diagram).

Содержание 885-E33









































































Результаты поиска

Содержание 885-E33

Отзывы:

Бренды по названию

Популярные бренды

Brother 885-E33, Руководство по эксплуатации

Результаты поиска

Содержание 885-E33

Отзывы:

Бренды по названию

Популярные бренды