Brother 885-E33 Скачать руководство пользователя страница 10

Страница: 10 / 72

KNOWING YOUR SEWING MACHINE

■

Storing the spool cap

The included spool cap (large, medium, small)
can be stored by attaching it to the spool pin as
illustrated below.

■

Storing the spool pin

When placing the cover on the sewing machine
or if the spool pin will not be used, return the
spool pin to its storage position.

Press until it clicks.

■

Installing the spool pin

Insert the tab on the spool pin into the hole.

Hole

Tab

Push the spool pin down until it locks into
place.

USING YOUR SEWING

MACHINE

Power supply precautions

Be sure to observe the following precautions
concerning the power supply.

WARNING

• Use only regular household electricity for the

power source. Using other power sources may

result in fire, electric shock, or damage to the

machine.

• Make sure that the plugs on the power cord

are firmly inserted into the electrical outlet

and the power supply jack on the machine.

Otherwise, a fire or electric shock may result.

• Do not insert the plug on the power cord into

an electrical outlet that is in poor condition.

• Turn off the main power and remove the plug

in the following circumstances:

· When you are away from the machine

· After using the machine

· When the power fails during use

· When the machine does not operate

correctly due to a bad connection or a

disconnection

· During electrical storms

CAUTION

• Use only the power cord included with this

machine.

• Do not use extension cords or multi-plug

adapters with many other appliances plugged

in to them. Fire or electric shock may result.

• Do not touch the plug with wet hands. Electric

shock may result.

• When unplugging the machine, always turn off

the main power first. Always grasp the plug

to remove it from the outlet. Pulling on the

cord may damage the cord, or lead to fire or

electric shock.

• Do not allow the power cord to be cut,

damaged, modified, forcefully bent, pulled,

twisted, or bundled.

Do not place heavy objects on the cord. Do

not subject the cord to heat. These things may

damage the cord and cause fire or electric

shock. If the cord or plug is damaged, take the

machine to your authorized dealer for repairs

before continuing use.

• Unplug the power cord if the machine is not to

be used for a long period of time. Otherwise a

fire may result.

Содержание 885-E33









































































Результаты поиска

Содержание 885-E33

Отзывы:

Похожие инструкции для 885-E33

Бренды по названию

Популярные бренды

Brother 885-E33, Руководство по эксплуатации

Результаты поиска

Содержание 885-E33

Отзывы:

Похожие инструкции для 885-E33

Бренды по названию

Популярные бренды