Brother 882-S96, Руководство по эксплуатации

Страница: 39 / 252

UPPER THREADING
G
etting
Re
ad
y
27
1
Threading Manually
Automatic threading cannot be used when using
the wing needle, the twin needle, or special thread
with a thickness of 130/20 or thicker. In these
cases, thread the needle as described below.
a
Turn the main power to ON.
b
Turn the handwheel so that the line on the
machine is aligned with the line on the
handwheel.
a
Line on handwheel
c
Press .
→
The key appears as .
d
Raise the presser foot lever.
e
Pivot the spool pin so that it angles upward.
Set the thread spool on the spool pin so that
the thread unwinds from the front of the
spool.
a Spool pin
b
Spool cap
c
Thread spool
Note
When the “Automatic Threading” button is
pressed, the presser foot will be automatically
lowered.
If you are using an incorrect needle and thread
combination, the hook may sometimes get
caught in the needle. If this happens, remove
the hook from the needle as described below.
CAUTION
• The needle thread carrier will automatically
thread the needle when the “Automatic
Threading” button is pressed. Be sure to keep
your hands and other items away from the
needle area, otherwise injuries may occur.
15
8
10
9
11
5, 6
7
3
4, 12
13
14
1
2
Memo
If the line on the machine is not aligned with
the line on the handwheel, the sewing
machine cannot be threaded. Check that the
line on the handwheel is facing up as shown in
the illustration above.
a
b
c
a