Configuring your network printer
2 - 4
2
3
Select
Search Active Devices
from the
Devices
menu. BRAdmin Professional will search for new
devices automatically.
Note
•
If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional utility screen.
•
You can find the node name and Ethernet address (
Node Address
above) by printing out the Printer
Settings Page. See
Printing the Printer Settings Page
on page 7-6 for information on how to print the
Printer Settings Page on your print server.
4
Double-click the unconfigured device.
5
Enter the
IP address
,
Subnet Mask
and
Gateway
(if needed) of your print server.
6
Click
OK
.
7
With the correctly programmed IP address, you will see the Brother print server in the device list.
Using the control panel to configure your machine for a network
(for HL-5270DN)
You can configure your network printer using the control panel
Network
menu. See
Using other methods to configure your network printer
You can configure your network printer using other methods. See
Other ways to set the IP address (for
