13
Door Fitting.
Desire & Ignite Inset:
The Door assembly supplied should be ready to fit, once the fire is installed then
hang the Door onto the hinges fixed on the main body by locating the hinges on
the door over the top of the hinges on the main body, move the door open and
closed a few times so that the hinge mates correctly.
Hereford Inset:
The door should be supplied assembled with the upper hinge pin in position and
the lower hinge pin ready to fit to the assembly. Locate the upper hinge pin in
position in the upper hinge on the main body. Manoeuvre the door so that the
lower pin (supplied) can drop through into the lower hinge pin. Lock the lower pin
in position by fixing the slider component in position using the M5 Allen bolt. The
slider should rest on top of the pin so as to prevent the pin rising up out of the
lower hinge.
