10
Please unpack carefully ensuring that any loose parts and all packing items are
removed. Read any warning labels carefully (see Maintenance Section).
Place waste packaging back into box and dispose of RESPONSIBLY.
The appliance must be positioned so that plug (fused spur) is accessible.
Only when you are certain that you have completed the following
installation instructions should you plug in and switch on at the wall socket.
Contents: 1 x Stove Body Trim, 1 off Fire engine (attached to stove body),
Instruction leaflet, 4 off No.6 x 1 ¾” screws, 1 x Door (Packed in box),
2 x Angle Brackets (for back panel), 6 x Angle Bracket Fixings, 2 x Wall
Fixings
Check that the supply voltage details on your flame effect fire are in accordance
with your electrical supply. Your fire is fitted with a plug incorporating a 13 Amp
fuse. In the event of replacing the fuse in the plug supplied, a 13 Amp fuse
approved by ASTA to BS 1362 must be used. Before switching on, please read
the following operation instructions.
First ensure that the opening dimensions match the drawing below
Unpack the fire by removing all the boxes from
the pallet and then removing the stove main body
by loosening and removing the 4 screws. With the
body removed next unscrew the fire engine from
the pallet and remove the L shaped bracket from
the bottom rear of the stove “wings”
