Brose Allround, Руководство пользователя

Страница: 27 / 40

Brose Display Allround | Operation and Control 27 | EN
If the e-bike is switched on, the display unit
remains switched on while riding; even if the
motor assistance is deactivated.
5.2. Basic Control Elements
With the control unit keys, you can
ergonomically control the functions of the
e-bike system. The hand can remain on the
handlebar grip while the thumb operates
the control unit keys. The information on the
display tells you about the selected assistance
level and gives you more information about
your Brose Drive System.
Switch the e-bike on or off with the
«On/Off»
key (Fig. B-a).
With the
«Menu»
key (Fig. B-b), a range of
information can be called up while riding.
Use the
«Plus»
(Figure B-d) and
«Minus»
(Figure B-e) keys to increase or decrease the
assist level. If you are in a menu (e.g. settings),
you can use these two keys to scroll up or
down in the menu. Press the
«Menu»
key (Fig.
B-b) to confirm the settings. You can go back
one level at any time using the
«Light»
key
(Fig. B-c). Changed settings are saved.
NOTE
The menu and the settings menu cannot be
accessed while riding.
All the interface illustrations and text on the
following pages correspond to the release
status of the software.
Due to the fact that the software can be
updated several times during a year, it is
possible that the interface illustrations and/
or interface texts will change slightly after an
update.
5.3. Switching the Brose Drive
System On and Off
The Brose Drive System can only be operated
with a sufficiently charged battery.
NOTE
Depending on the installed battery, it may take
a few moments for the display to turn on.
Switching on
To switch on the e-bike system you have the
following options:
›
With the e-bike battery inserted, briefly
press the
«On/Off»
key on the control unit
once.
›
Press the
«On/Off»
key on the e-bike
battery (bicycle manufacturer-specific
solutions are possible that do not have
access to the battery
«On/Off»
key, see
battery/bicycle manufacturer‘s manual).
The display unit activates automatically.
›
The Brose Drive System is now ready to
operate.
The drive is activated as soon as you pedal
(except in the
«Walk Assist»
function or in
the
«OFF»
assistance mode). The motor power
depends on the set assistance level on the
control unit.
As soon as you stop pedalling in normal
operation, or once you have reached a speed
of 25 km/h, the e-bike drive assistance
will be disabled. The drive is automatically
re-activated as soon as you pedal and the
speed is below 25 km/h.