BrookVent AF 90-CYC-ONE-100, Инструкция по установке, обслуживанию и эксплуатации

Страница: 5 / 20

4/19
2.0 Safety
The following information must be read carefully to ensure safe installation and
operation of the unit.
2.1 General Safety
✓
The device should not be used for applications other than those specified in this
manual.
✓
After removing the product from its packaging, verify its condition. In case of
doubt, contact a qualified technician. Do not leave packaging within the reach of
small children or people with disabilities.
✓
Do not touch the appliance with wet or damp hands/feet.
✓
This appliance can be used by children aged 8 years old and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children should
not play with the appliance. Cleaning and user maintenance should not be
performed by children without supervision.
✓
Do not use the product in the presence of flammable vapours, such as alcohol,
insecticides, gasoline, etc.
✓
If any abnormalities in operation are detected, disconnect the device from the
mains supply and contact a qualified technician immediately. Use only original
spare parts for repairs.
✓
The electrical system to which the device is connected must comply with
regulations.
✓
Before connecting the product to the power supply or the power outlet, ensure
that:
❖
the data plate (voltage and frequency) corresponds to those of the
electrical mains
❖
the electrical power supply/socket is adequate for maximum device power.
If not
, contact a qualified technician.
✓
The device should not be used as an activator for water heaters, stoves, etc., nor
should it discharge into hot air/fume vent ducts deriving from any type of
combustion unit. It must expel air outside via its own duct.
✓
Operating temperature: - 20°C up to +50°C.
✓
The device is designed to extract clean air only, i.e. without grease, soot, chemical
or corrosive agents, or flammable or explosive mixtures.
✓
Do not leave the device exposed to atmospheric agents (rain, sun, snow, etc.).
✓
Do not immerse the device or its parts in water or other liquids.
✓
Turn off the main switch whenever a malfunction is detected or when cleaning.
✓
For installation an omni polar switch should be incorporated in the fixed
wiring, in accordance with the wiring regulations, to provide a full