Note:
If your disc is dirty, heavily scratched, or otherwise
unreadable, the display will continue to show two dashes “– –” but
playback will not begin.
6. Adjust the VOLUME control to the desired level.
7. Playback will continue until the last track has played, then the
player stops, the display briefly shows the total number of tracks,
then returns to the correct time again. To stop playback before
the disc ends press the
STOP button at any time.
8. Press on the CD door in the area marked OPEN/CLOSE to open
the CD door, remove your disc, and close the door again.
9. Press the POWER ON/OFF button to shut the system ‘Off.’
Notes:
•
If you shut the power off while a CD is playing and you leave the
disc in the player, the disc will start playing from track 1 when you
switch the system ‘On’ again.
•
To see the track number that is playing, press the TIME button once.
The display will show the track number for five seconds and then
return to the correct time display.
467522_INS_Smar
tS
et CD Alarm Clock
5"W x 4.75"H
Output at 100% P
rints 1/0 Black
35
467522_INS_SmartSet CD Alarm 3/22/07 9:25 AM Page 36
