• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
PREPARATION FOR USE
Unpacking and Set-Up
1. Remove the unit from the shipping carton and remove all packing
material from the unit. Please save the carton and packing material
if possible in the event that your unit ever needs to be returned for
service. Using the original carton and packing materials is the only
way to protect your unit from damage in transit.
2. Carefully remove any small strips of tape that may have been
used to keep the CD door closed during shipment.
3. Press on the CD door in the area marked OPEN/CLOSE to open
the door. Inside the CD compartment you will see a white
“dummy CD” transit protection card. This card prevents the laser
pick-up from moving during shipment and it must be removed
before you can load your own CDs. Carefully remove this transit
protection card and discard it.
10
467522_INS_SmartSet CD Alarm 3/22/07 9:25 AM Page 11
