Brookstone Renew 3D, Руководство пользователя

Страница: 6 / 11

8 9
Before operating the massage chair, review the warnings beginning on
Page 2.
• Do not operate if there are any holes or tears in the chair covering. Unplug
the chair and contact Brookstone Customer Service at 866-336-3199.
• To avoid overheating, the massage chair will automatically shut off if it
begins to overheat. Allow the chair to cool for a minimum of 30 minutes
before starting another massage session.
• When adjusting the backrest and foot rest, always ensure there is no object
under the footrest/seat and keep children or pets away to prevent injury.
• Do not sit on the Renew™ 3D Massage Chair with the foot rest raised.
Any sudden heavy weight on the foot rest could cause damage to the
mechanism, accident and injury if the massage chair tips over.
• Ensure that the backrest returns to its full upright position before sitting on
the massage chair and reclining it according to your preference.
• Do not place fingers or objects in the gap between the seat and the sides/
backrest/footrest.
OPERATING THE MASSAGE CHAIR
1. Ensure that the main power switch, located on the back of
the chair, is in the OFF ( O ) position.
2. Plug the power cord into the power inlet on the back of the chair, and plug
the other end into an appropriate outlet. See Page 5 for information on
appropriately grounded outlets.
3. Click the main power switch, located on the back of the chair,
to the ON ( | ) position.
4. Press the Power button on the controller .
5. Select your massage options, as described on Pages 10 through 14.
Each massage session should not exceed 30 minutes. Targeted
massage should not exceed 5 minutes on any one area.
CONTROLLER
In an emergency or if there is any malfunction, press the Power
button on the controller to stop the massage. The massage will stop,
the nodes will return to their home position, and the chair will return to
the exit position. Click the main power switch on the back of the chair to
the OFF position.
To prevent damage to the controller:
• Do not sit on, step on, or place heavy objects on the controller.
• Do not drop the controller. Place the controller into its holder when not in use.
• Do not exert excessive force on the controller, or operate it using sharp-
edged or hard objects. Do not handle the controller with wet hands.
• Do not attempt to move the chair by pulling on the controller.
Caution
Menu Panel,
see Page 10
Zero Gravity
see Page 14
Pause
see Page 10
Power
Menu
see Page 10
Navigation
see Page 10
Backrest Position
see Page 14
Automatic
Programs
see Page 11
Quick (Demo) Program
see Page 11
Heat
see Page 14
3D Effect
see Page 14
Footrest Position
see Page 14
Footrest Rollers
and Airbags
see Page 14