9
fooT sPa oPeRaTIon
FIllINg tHe FOOt SPa WItH Water
Make sure the foot spa’s power cord is not inserted into an electrical outlet
and that the unit is off .
1 . Remove the SPLASH COVER .
2 . Fill the unit with water up to the WATER FILLING LINE .
3 . Replace the SPLASH COVER .
Note: do not add bath salts, oils or crystals to the water, as residue
may build up and clog the aIr HOleS.
Important! If the Water SeNSOrS do not detect water in the
reservoir, the Foot Spa will not activate.
UsIng The fooT sPa
The foot spa has two rotatable AQUA JETS and two jet speeds allowing you
to customize your massage . Turn the AQUA JETS outward and use Low speed
for a soothing massage . Direct the AQUA JETS towards the feet and increase
the speed for a more intense therapeutic massage .
1 . With the foot spa filled with water, insert the power cord into an electrical outlet .
2 . Press POWER button on the main unit . The POWER INDICATOR illuminates
and the AQUA JETS activate on LOW . The LOW INDICATOR illuminates .
3 . To change between High and Low speeds, press JETS on the unit . The HIGH
INDICATOR or LOW INDICATOR will illuminate depending on your selection .
Pressing and holding JETS will toggle between High and Low speed .
