Follow the steps below to pair and connect the earbuds
to your Bluetooth enabled device.
Connecting
1. The earbuds will automatically
be in Bluetooth pairing mode
when taken out of the case for
the first time.
2. After the earbuds link with each
other, the LED of the right earbud
will quickly flash RED while the
LED of the left earbud will slowly
flash WHITE indicating they are
in Bluetooth pairing mode.
3. Open your device’s Bluetooth
menu and find
Brookstone
BKH600
and select it to pair.
4. Once paired, the voice prompt “Connected” will be
heard and the LEDs of both earbuds will slowly flash
WHITE.
Note:
After taking the earbuds out of the case, they will
automatically link to each other and then try to connect
to a previously paired Bluetooth enabled device. If they
do not find a device to connect to, they will automatically
be in Bluetooth pairing mode.
Disconnecting
Open the Bluetooth settings on your device, and select
“Disconnect” to disconnect from an already connected
device. You'll hear a voice prompt "Disconnected" and
the earbuds will go into pairing mode.
Note
: Do not select “Forget this device” or you will have
to go through the pairing process again.
Brookstone BKH600
DEVICES
Bluetooth
i
Disconnect
Forget this device
<
Bluetooth
8
