background image

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

Warning:

 

Changes or modifications to this unit not expressly approved 

by the party responsible for compliance could void the user's authority 
to operate the equipment.
 

Note:

 This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
 
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help

Information Regarding Exposure to Radio Frequency Energy 

Your device is designed and manufactured not to exceed the emission 
limits for exposure to RF energy set by the Federal Communications 
Commission of the United States (FCC). Information on your Device is 

on file with the FCC and can be found under the Display Grant section 
of http://www.fcc.gov/oet/ea/ after searching on the FCC ID for your 
Device, which can be found on the back of the Device.

LITHIUM POLYMER BATTERY WARNINGS

This device contains a non-removable Lithium- 
Polymer battery. The battery must be recycled or 
disposed of properly. Contact your local waste 
management office for information on battery 
recycling or disposal.

Rating Label Definitions

Direct current symbol.

This symbol signifies the product must not be discarded as 
household waste, and should be delivered to an appropriate 
collection facility for recycling. Proper disposal and recycling 
helps protect natural resources, human health and the 
environment. 

This symbol signifies and declares that this equipment has 
battery charging which complies with California CEC and 
energy efficiency.

This symbol signifies that this is a wireless device powered 
by Bluetooth® technology. The Bluetooth® word mark and 
logos are registered trademarks owned by Bluetooth SIG, 
Inc., used under license.

Содержание airphones BKH600























Отзывы: